Key Holder

Hi all, Just a simple multilevel Hexagonal Key tidy. There are 3 heights of key fob to match the varying heights of the holder. Below are the quantities of each you would need to print to fill the holder but I think it looks better if you leave some gaps x4 - 15 x11 - 20 x4 - 25 Depending on your printer you may need to scale the print to fit on your bed. Technically there should be a 0.1mm gap between the fob and the holder but I had a slight issue with the squish effecting the fit of the fobs into the holder so I scaled the fobs slightly more than the holder. I scaled to; Holder = 70% Fobs = 68.5% Just because I preferred the smaller fob size for the keyrings. Update: I have added a v2 holder to fit the 15mm key fobs. That way you can print all 15's. I have also added a v2 with holes as i know someone mentioned mounting it on a wall. Cheers

Category: home-organization